ALLTEQ LFI-306Programmable XY
3rd Optical Inspection System

Site Map   Home


Hands Free Inspection

Model LFI-3060 Programmable XY After Wire Bond Inspection Station  

Machine Vision for Fully Automatic Inspection

Machine Cabinet

The Model LFI-3060 is Ideal for wide Y travel and Matrix applications.


Inspection 

Ideal for Matrix Leadframes
High Power/Low Power Scopes
High Resolution Video
QA/QC/Production/Hands Free
100%/Sampling/AQL

Versatility

Programmable Scan Lines
Programmable Inspection Sites
Trackball Override
Reject I.D. Options

Data Collection

Wire bond Yield
Die Bond Yield
Operator Performance
Shift Performance

Reject   I.D.
Side Rail Punch, Notch or Hole 
Lead Punch
Ink Marker, Top or Bottom
Scribe Marker, Top or Bottom
Wire Wiper

Reject Options
 

Description
The Model LFI-3060 Inspection Station incorporates a fully programmable X-Y table, which moves under a customer-selected optics package.  Allteq offers a wide range of optics package for use on the 3060.  The station is ideal for matrix/array type leadframes (up to 14 wide), multi-chip modules and large die.  The versatility of the machine will allow an inspection program that could include up to 250 steps.  Scan lines, jumps or inspection points can be made part of the inspection program.
Process Flow
A magazine of wire-bonded devices is presented to the LFI-3060 for inspection.  The 3060 can be programmed with four types of inspection methods which include 100%, Sampling, Auto AQL or Custom Mapping.  The magazine number is then entered along with the lot number and operator number (if required), into the machine.   Units are now presented under the microscope, camera or combination in accordance with the inspection method selected.  The programmable X-Y table then moves the device under  the optics package to the pre-programmed positions.  The operator can override the 3060 at any time and move around the device manually using the 3060's trackball control.  If the operator sees a reject unit in the inspection process, a reject code is entered.  The reject information and location can then be sent to the 3210 Data Collection Center for yield/reject analysis.  Optionally a reject tool can be used to identify the bad device automatically
STANDARD FEATURES LFI-3060 
  •   Menu Driven Software
  •   Programmable timed inspection
  •   .600" to 3.150" Leadframe Capability
  •   Single magazine elevator
  •   Auto AQL inspection
  •   100 reject codes
  •   Fast product change over
  •   Status tower / Green-Yellow-Red 
  •   Programmable sampling plans
  •   250 program storage
  •   Built in diagnostics
  •   Allteq reliability
SPECIFICATIONS
PHYSICAL
Weight: 
Depth: 
Width: 
Height:
Tower: 
130 lbs.  
24 inches  
33 inches 
14 inches (less tower)
add 20 "

FACILITIES
Power:
Air: 
115/230V 250W 50/60Hz 
70 PSI Min 

ELECTRONICS
Microprocessor: 
Battery backup:  
Display: 
68331 
10 Year 
2 x 40 

MECHANICAL
X-Y Travel:
Leadframe Width:
Max. Leadframe Length:
Max. Magazine Height:  
Indexer Accuracy:   
Frame Changeover:
1.40" x 1.90"
.600" to 3.150"
9.25" - 12.00"
7.00" 
+/- .004" 
60 Sec.

Also Running Devices in Auer and Auer type boats

Allteq offers a wide range of optic packages for a wide variety of applications. Please contact Allteq or your local agent for more information.

All of Allteq's agents are factory trained to assure customer satisfaction.
                               
Note: Specifications subject to change without notice.
Effective 1/28/08